POLYSIL is a superb
filling, insulation and adhering silicone
for general insulation - adhering filling
purposes. It could be safely used on sealing
connections made for door and window frames,
wooden, metallic, PVC and similar filling,
insulation and adhering applications, glass,
heat insulant glass, shop windows and installation
of PVC joinery works, adhering tiles, ceramics
and any connection which may be adversely
effected by water, connections with and without
cloth, gaskets, in connection of all sorts
of flanges, assembly works for sea and aircraft.
Acetoxy cured and neutral types and transparent,
white and black colors are available.
WHY
POLYSIL
Resistant against changes in
the weather.
Proof against water, acids and
bases.
Highly flexible
Single component without solvents
Solidifies by application of
humidity
Retains flexible nature
Resistant against aging and UV
rays
Shall not retain paint on surface
50
gr
85
gr
280
ml
310
ml
Standard
Colors
Trans
parent
White
Standard
Colors
Trans
parent
White
Black
APPLICATION
Clean the application place. Surfaces must
be clean, dry, without grease or dust. Cut
the top of the cartridge, screw on the plastic
nozzle on top. Cut the tip of the nozzle
to a sharp angle. Insert cartridge on a
gun and extrude. After the application,
smooth the surface with a wet spatula.
IMPORTANT ADVICE
Silicone sealant should only be applied
while the room is sufficiently ventilated.
Avoid contact with skin and eyes. Keep sealant
away from children.
