Polyfix is a high
quality one component polyurethane foam that
hardens by humidity. It adheres and seals
all building materials except materials such
as polyethylene, Teflon, silicone, oils and
greases. It expands to take the shape of cracks,
may be safely used for general sealing, filling
and insulation works. It can be cut, sanded
and painted.
WHY
POLYFIX
Fills and insulates cracks, holes,
connections and spaces.
Insulates hot and cold water
pipes, bath-tubs.
Seals and insulates metal, wooden
and pvc door and window frames
Provides installation and insulation
works
Fills and seals holes and spaces
caused by installation of heat insulation
systems, electrical outlets, ventilation,
aspiration systems, air-conditions
and other facilities.
Fills the spaces
between two individual buildings.
500
ml
750
ml
300
ml
Fills the wall passage spaces
of ventilation ducts.
Seals the holes caused by dowel
pins and rats.
Fills the inter-connection
spaces in the roof.
Helps affixing front panel, corrugated
iron and roof tiles.
Seals the leaking chimney holes.
Provides insulation to various
cups.
Helps minimizing noise caused
around the running engines.
Contains absolutely no environment
hazardous propellant gases.
Excellent dimensional stability
(no shrink or post-expansion)
APPLICATION
The surfaces must be clean, firm, free
of dust, grease and mould release agents.
If necessary, moisten the surfaces before
applying the foam. Shake can vigorously
at least 20 times before use. Remove
the protective cap and screw on the
plastic nozzle. Always handle the can
with the valve downwards when applying.
The amount delivered is controlled by
the lever on the valve. Apply foam sparingly.
Apply in ribbons. Moisten in between
layers.
IMPORTANT
ADVICE
Store cans upright. Only use in well
ventilated areas. No smoking. Not UV
resistant. Protect your eyes, wear gloves
and industrial clothing. The application
must be in temperatures between 5 and
25 deg. C. Protect floor coverings with
paper or plastic film. Remove excess
foam immediately with FOAMCLEAN cleaner
or acetone. Hardened foam can only be
removed mechanically
